In order to give you a better service Airbus uses cookies. By continuing to browse the site you are agreeing to our use of cookies I agree

Search
Newsroom
BepiColombo - Mission to Mercury
12 June 2017 Space

BepiColombo - Mission to Mercury

Related media

toggle button (15)
BepiColombo - Stack configuration and MOSIF      
BepiColombo in Space      
BepiColombo - Stack building      
BepiColombo - Flight configuration in clean room      
BepiColombo - Protection against infernal heat      
BepiColombo - Exploring Mercury      
BepiColombo - Mission to Mercury        
BepiColombo - Module separation animation        
BepiColombo - MPO and Mercury animation        
BepiColombo - Animation in space        
BepiColombo - Clean room footage        
BepiColombo - Building up the stack footage        
BepiColombo - MMO probe Footage        
BepiColombo - MPO and MTM probes Footage        
BepiColombo - a four in one satellite to uncover Mercury's mysteries - ES      
BepiColombo - a four in one satellite to uncover Mercury's mysteries - FR      
BepiColombo - a four in one satellite to uncover Mercury's mysteries - EN      
BepiColombo - a four in one satellite to uncover Mercury's mysteries - DE      

37/177

Mercury - a special challenge for visiting spacecraft

To this day, Mercury remains the most mysterious planet of our solar system. The Sun’s glare makes it impossible to study via telescope and the extreme heat and proximity to the Sun make it hard to reach. So far, only two NASA missions have visited Mercury: Mariner 10 in the 1970’s and Messenger, which orbited the planet from 2011 until it ran out of fuel in April 2015.

As many questions remain unanswered, ESA and the Japanese Aerospace Exploration Agency (JAXA) have teamed up for the dual spacecraft mission “BepiColombo”, named after the Italian professor Giuseppe ‘Bepi’ Colombo, who was instrumental in making the Mariner 10 mission such a success. This mission has a spacecraft made up of two separate orbiters, the Mercury Planetary Orbiter (supplied by ESA) and the Mercury Magnetospheric Orbiter (supplied by JAXA), and a propulsion module.    

As prime contractor for ESA, Airbus Defence and Space is responsible for designing and building the Mercury Planetary Orbiter (MPO) and all other European spacecraft hardware.

“We have created a stacked spacecraft, so that both orbiters can travel to Mercury as one unit, powered by a common propulsion module – the Mercury Transfer Module (MTM),” explains Roger Wilson, of the Airbus system engineering team.

“When they reach their destination after their seven-year journey, the two orbiters will separate and operate in their own individual orbits around the planet to conduct the most thorough exploration of Mercury ever undertaken.”  

As it is only 58 million kilometres away from the Sun, Mercury presents a special challenge to visiting spacecraft. During the day, the planet’s surface is baked enough to melt certain metals, so spacecraft in orbit not only have to be able to cope with the immense heat of the Sun, but also with the infrared radiation emitted by the hot surface of the planet.

Tasked with observing the planet’s surface, ESA’s Mercury Planetary Orbiter will keep the same spacecraft face towards Mercury as it needs continuously point its instruments at the planet’s surface. As a consequence, the Airbus engineers have covered the external surface with very high temperature multi-layered insulation. This material, made up of 49 layers of ceramics and aluminium, has been designed especially for the BepiColombo mission. Another difference to standard spacecraft is the antenna material, which are made from heat-resistant titanium.

BepiColombo - Exploring Mercury  
30 June 2017 Newsroom

BepiColombo - Exploring Mercury

How to get to Mercury?

As a spin-stabilised spacecraft, the Japanese-built Mercury Magnetospheric Orbiter (MMO) is less sensitive to the solar illumination than the MPO as all of its sides will be evenly exposed to Sun and planet. During the seven-year journey, however, when it has to stay still, it needs to be protected by the MOSIF (MMO Sunshield and Interface Structure). This gives the BepiColombo travel stack an appearance reminiscent of an ice cream cone.

To travel from Earth to Mercury involves slowing the spacecraft and allowing the Sun’s gravity to pull the spacecraft towards it – thereby reducing the size of the orbit around the Sun. To arrive at the correct speed to be captured into orbit by Mercury’s gravity, the spacecraft must slow by 7 km/s – this is 7 times the thrust needed to reach Mars. BepiColombo achieves this braking by means of 9 planetary fly-bys (one x Earth, two x Venus, six x Mercury) and the use of an Electric Propulsion System (especially developed for the mission) to provide 4 km/s of the braking. to reach its final scientific orbit around Mercury. During the 7 year cruise phase, BepiColombo will complete 18 orbits around the Sun.  

BepiColombo's mission

Once in orbit, BepiColombo will study Mercury at different wavelengths, map the planet’s mineralogy and elemental composition and explore the magnetosphere and polar deposits as well as the origin of Mercury’s magnetic field. Further experiments will test Einstein’s theory of general relativity.

BepiColombo - Stack building (square)  
30 June 2017 Space

BepiColombo - Stack building

BepiColombo - Stack configuration and MOSIF  
05 July 2017 BepiColombo

BepiColombo - Stack configuration and MOSIF

Latest News

Hong Kong Government Flying Service rescues 70 amid typhoons

en

Sepang Aircraft Engineering opens second hangar

en

Widebody jetliner deliveries begin at Airbus’ new A330 Completion and Delivery Centre in China

en

APEX Expo 2017 – Long Beach USA

en

Airbus celebrates ‘best in class’ supplier performance

en

Airbus Foundation and the Spanish Red Cross Association to promote the Flying Challenge project

en es

Airbus on social media

Back to top